TQS/TYS Series Ventilation Sterilizer Introduction:
TQS/TYS series ventilation sterilizer is used in prefilled glass or palstic syringes, retort pouch packed mask and wipes, contact lenses, blood bags.
The sterilizer adopts mixed clean steam and air as sterilization medium. The sterilization equipment pressure balance, back pressure protection can be well controlled by this way. So sterilization equipment is used for the items that need to keep shape, sealed in the same time of sterilization. Force convection fan and air guide plate structure, make the chamber non saturated steam well mixed to ensure the sterilization temperature evenness.
The sterilizers are equipped with cooling coil. Product cooling and drying is achieved by the condensation of the mixed gas inside the chamber through getting the cooling water into the coil. Product is cooled by the cold air and the water on the surface of the product evaporates in the same time. To realize the purpose of cooling and drying finally. The sterilizer machine could also be equipped with hot air drying function for some products that have high requirements for the drying effect.
Ventilation Sterilizer Structure:
The main-body of this ventilation sterilizer adopts orizontal rectangular structure. with chamber made by 304 or 316L stainless steel material. The sterilizer is covered by the external plate that is made by draw-benched stainless steel. And the equipment is accessorized with standard GMP verification interface. Industrial control system PLC + HMI has a standard “user management, data storage, process management” function. The sterilization process can be traced back, with independent data recording device and Industrlal control system to ensure data accuracy.
Steam and air mixture sterilization
This series steam and air sterilizer adopts clean steam and air mixing sterilization process mode, pressure balance and back pressure protection of equipment and sterilization loads can be well controlled, this equipment is widely and well used for the items that need to keep shape and sealed in the same time of sterilization.
Good sterilization temperature evenness
The forced convection fan and air guide plate structure makes the chamber non saturated steam mixed well to ensure the sterilization temperature uniformity.
Nice chamber structure and finish
Nice chamber finish, the equipment is with firm structure. Every autoclave is detected by X ray, and certified by the government, which could fully meet the standard of pressure vessel. The chamber is made by SS304 or SS316L stainless steel, and is fitted with GMP validation port. Good quality silicon insulation layer is surrounded outside of the chamber to reduce the heat radiation on the surface of the machine.
Precise control system
Intelligent temperature sensor, pressure transmitter and pneumatic valve ensure chamber pressure, temperature detecting and control.
Ventilation Sterilizer Parameter Table:
|Main Parameter / Model||TQS-1.0||TQS-1.5||TQS-2.0||TQS-2.5||TQS-3.0||TQS-4.0||TQS-5.0|