Huanyu autoclave provide you autoclave,sterilizer,medical autoclave,water shower sterilizer,pulse vacuum autoclave,steam sterilizer.Huanyu pharmaceutical autoclave equipment is the one of the highest quality manufacturers and suppliers.

Large Infusion Autoclave

Widely used in glass vial, plastic vial, soft Bags
Large Infusion Autoclave

SQS/SYS Series

Water Shower Autoclave
Water Shower Autoclave
Nice Chamber Structure and Finish Nice Chamber Structure and Finish
Nice chamber finish, and the sterilization equipment is with firm structure, which could stamped by proficient 3 bars, and each autoclave is detected by X ray. The autoclave is certified by the government and could fully meet the standard of pressure vessel. Good quality silicon insulation layer is surrounded outside of the chamber to reduce the heat radiation on the surface of the machine.
Full Automatic Door
The sterilization equipment is equipped with full automatic door. The autoclave can also be made to double door structure. The autoclave can realize the isolation between the operation area and the sterile area.
Stainless Steel Piping
Stainless steel pipelines are used to avoid corrosion that may lead to secondary contamination of the sterilized loads.
Autoclave
All Round Flexible
Custom Made Service
The autoclave size could be customer made. And the autoclave structure and operation principle could also be designed to different kinds of structures according to customers’ different requirements
Door Structure
Superheated water autoclave has two types of door structure:
1. SQS series small type superheated water autoclave adopts hinged door.
2. SYS series large type superheated water autoclave adopts horizontal sliding door.
Autoclave Door Structure
Chamber Structure
Superheated water autoclave has two types of chamber structure:
1. SQS series small type superheated water autoclave adopts horizontal rectangular structure.
2. SYS series large type superheated water autoclave adopts horizontal cylinder structure.
Autoclave Chamber Structure
Sterilize Status Classifications
Superheated water autoclave could be designed to three types of sterilize status according to different products:
1

Stable Sterilization

Sterilization loads are still inside the chamber during sterilization, this type of sterilization method is suitable for ampoules, vials, syringes and soft bags, which is of the widest application.

2

Movable Sterilization

Sterilization loads are swing inside the chamber during sterilization, this type of autoclave is mainly suitable for the sterilization of emulsion packed in soft bags, which is with nitrogen replacement and pressure holding function.

3

Rotation Sterilization

Sterilization loads rotate inside the chamber during sterilization, this type of autoclave is suitable for the sterilization of emulsion liquid.

Autoclave Logistic System

Large Infusion Autoclave
Large Infusion Sterilization Equipment
Water Shower Autoclave
Water Shower Sterilization Equipment
Autoclave
Sterilization Medium
Movement Classifications
Superheated water autoclave sterilize by using the circulate over-heat water, and it could be designed to two types of sterilization medium movement types according to different sterilization craft requirements:
1. Water shower type sterilization: The water is spray to the sterilization loads evenly, this type of sterilization method is fast and could save source energy.
2. Water bath type sterilization: The sterilization loads are fully bathe inside the superheated water, by this way, the temperature evenness is better, and the control is more precise.
Precise Control System
SQS series autoclave adopts industrial control system PLC + HMI control method to realize full automatic control, and it has standard “user management, data storage, process management” function, the sterilization process can be traced back, with independent data logger and industrial control system to ensure data accuracy.
SYS series autoclave adopting upper and lower machine control to realize both online and offline control. And it is also equipped with “user management, data storage, process management” function, the sterilization process can be traced back, with independent data logger and industrial control system to ensure data accuracy.
Load Traceability
PLC could provides Ethernet port and RS485 port, Ethernet supports S7 Siemens special protocol, RS485 supports Modbus RTU, USS communication, which could match with the common configuration software for online real time sterilization report collection, and remote control site computer under the permission of the authority, and the site condition allows, to output the historical data and operation records.
SQS Autoclave
Autoclave Safety Guide
The doors are designed with independent mechanical and digital safety features
Safety valves are installed to prevent pressure exceeds the allowed limit Emergency stop button is installed for immediate cycle shut off under emergency.

1. The door is not allowed to be opened when the chamber is pressurized
2. The cycle is not allowed to started when the door is not sealed.
3. Door process will automatically stop if obstruction is detected
4. The door cannot be unsealed until the chamber pressure reach room pressure
5. Under double door structure, double door interlock to prevent both doors open in the same time.

KQS/KYS Series Rapid Cooling Autoclave

Rapid Cooling Autoclave
Craft Process
Vacuum
Heating
Sterilization
Cooling
End
Rapid Cooling Autoclave
Craft Process
Water Inlet
Heating
Sterilization
Cooling
End
Rapid Cooling Autoclave Summary
This series of pulse vacuum autoclave adopts saturated steam(or pure steam) as sterilization medium, which is widely used in the high-temperature sterilization and rapid cooling operation of all kinds of sealed heat-resistant glass bottles or oral liquid packed infusion. Rapid cooling autoclave is widely used in the pharmaceutical, hospital preparations, food and other industries that have product requirement for the equipment capacity less than 5 m3, and sterilization temperature between 105℃ and 126℃.
Rapid Cooling Autoclave Structure
This series of equipment daopts horizontal rectangular structure, 304 or 316L stainless steel chamber, and covered by the plate made by draw-benched stainless steel. Rapid cooling autoclave is accessorized with standard GMP verification interface. Industrial control system PLC + Html has standard “user management, data storage, process management” function, the sterilization process can be traced back, with independent data recording device and industrial control system to ensure data accuracy. Temperature time and F0 dual control meet the requirement of pharmacopoeia.

KQS/KYS Series Fast Cooling Autoclave Parameter Table

Main paramater Model KQS1.2 KQS1.5 KQS2.0 KQS2.5 KQS3 KQS5
Capacity(bottle) 500ml 500 600 800 1000 1200 2000
250ml 800 1000 1500 1900 2300 3800
100ml 1600 2000 3000 3800 4500 7000
Chamber measurement 1500*680*1180 1900*680*1180 1700*1000*1200 2100*1000*1200 2500*1000*1200 4200*1000*1200
External measurement 1800*1420*2150 2200*1880*2200 2000*1880*2200 2400*1880*2200 2800*1880*2200 4500*1880*2200
Steam 50 60 80 105 120 250
Cooling water 800 1000 1500 1800 2000 2300
Compressed air 1.2 1.5 2.0 2.5 3 5
Power 3 3 5.5 5.5 6 8
Net weight 1900 2000 2500 3000 3400 4200
Design pressure 0.245 0.245 0.245 0.245 0.245 0.245
Design temperature 139 139 139 139 139 139

Huanyu Autoclave Video

Large infusion autoclave is widely used in the sterilization operation of liquids in glass vial, plastic vial, soft bags in the pharmaceutical industry.
  • About Huanyu Pharmaceutical Equipment
  • SQS/SYS Series Water Shower Autoclave

Recommended Autoclave

Zhangjiagang Huanyu Pharmaceutical Equipment Co.,Ltd

  • ADDRESS:
    South to Chengang Road,Jiangsu New Material Industry Park,Jingang Town,Zhangjiagang City,Jiangsu Province,China
  • Tel:
    +86-15150235218
  • Fax:
    +86-512-58375615
  • Wedsite:
    https://www.zjghuanyu.net

Leave message

    Please enter your message