Hydrogen Peroxide Gas Autoclave
1.This transfer chamber sterilize the exterior surfaces of the interior chamber and items inside the chamber by using vaporized hydrogen peroxide sterilization techniques, to ensure that items will not bring new microbial contamination to the high-grade clean area after passing through the sterilizer.
2.The hydrogen peroxide gas autoclave is closed cabin structure made of stainless steel.
3.The loading and unloading doors are made of stainless steel frame and transparent glass with good light transmission, and sealed by air seal. It has good visibility and large visual space.
4.The autoclave is equipped with guide rails,which could be docked with the trolley, making it convenient for loading and unloading the items together with chamber loading carts.
5.Scope of application: The hydrogen peroxide gas autoclave will be installed in a clean area for the sterilization transfer between two areas in different clean grade.
6.Hydrogen Peroxide Gas Autoclave Main feature:
a.Low temperature sterilization, at room temperature;
b.Less residual, the final decomposition products of hydrogen peroxide is water vapor and oxygen, no toxic by-products;
c.Sterilization time is short, low operating costs;
d.Good repeatability, and easy to verify;
e.Good material compatibility, have good compatibility to plastic, rubber, electronic products;
f.Broad-spectrum sterilization, can reach 6-log sterilization standard for Bacillus stearothermophilus;